Table of Contents
Advertisement
8-port Gigabit Ethernet Switch User's Guide
Highlight APPLY and press enter to make the changes current. Use Save Changes from the Main Menu to enter the
changes into NV-RAM.
IP Static Routes
To enter a static IP route into the Switch's forwarding table, highlight Static/Default Routes from the Forwarding
Menu and press Enter.
Figure 6-60. Setup Static IP Routes screen
The Action:<
> field can be toggled between Add and Delete using the space bar. E nter the IP address in the IP
] field and subnet mask in the Subnet Mask:[
] field. The IP address of the gateway (usually a router
Address:[
with a connection to a WAN or the Internet) is entered in the Gateway IP:[
] field and a corresponding metric (a
number representing the distance the gateway is from the IP interface in "hops" – or the number or routers between the IP
interface and the gateway) is entered in the Metric:[
] field.
Highlight APPLY and press Enter to make the changes current. Use Save Changes from the Main Menu to enter
the changes into NV-RAM.
Static ARP
To make a static ARP entry, highlight Static ARP from the Forwarding menu and press Enter.
110
Advertisement
Table of Contents
Troubleshooting
