D-Link DGS-3308TG User Manual page 169

8-port Gigabit Ethernet Switch User's Guide
Note: A VLAN that does not have a corresponding IP interface defined for it, will function as a Layer 2 Only
VLAN – regardless of the Switch Operation mode.
Items on the screen above include:
Interface Name – Displays the name of the IP interface corresponding to the IP address and subnet mask.
IP Address – The IP address of the IP interface (sometimes referred to as a network address).
Subnet Mask – The subnet mask corresponding to the IP address and IP interface name.
VID – The VLAN ID of the VLAN corresponding to this IP interface.
Active – Displays whether the IP interface is active or inactive.
New – A link to the IP Subnet – Add menu.
Delete – Click this icon to delete an IP subnet from this table.
IP Subnet - Edit
The following window is used to add or modify an IP interface to the Switch.
Items on the window above include:
Figure 7-17. Setup IP Interface screen
Figure 7-18. IP Subnet - Edit screen
159