Q Port Settings - D-Link DGS-3308TG User Manual

8-port Gigabit Ethernet Switch User's Guide
Items on the screen above include:
VLAN (VID) – The VLAN ID of the VLAN that is being created.
VLAN Name – The name of the VLAN that is being created.
Port – Corresponds to the ports that will be members of the VLAN.
Tag – Specifies the port as either 802.1Q tagging or 802.1Q untagging. Checking the box will designate the port as
Tagging.
None – Specifies the port as not being a static member of the VLAN, but with no restrictions for joining the
VLAN dynamically through GVRP.
Egress – Specifies the port as being a static member of the VLAN. Egress Member Ports are ports that will be
transmitting traffic for the VLAN.
Forbidden – Specifies the port as not being a static member of the VLAN, and as being forbidden from joining
the VLAN dynamically.

802.1Q Port Settings

The following read-only window allows you to view the current 802.1Q VLAN port settings on the Switch.
Figure 7-20. 802.1Q Static VLANs Entry Settings – Edit screen
Figure 7-21. 802.1Q Port Settings screen
161