Bootp Relay Commands - D-Link DES-3350SR Command Line Interface Reference Manual

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
The BOOTP relay commands in the Command Line Interface
(CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config bootp_relay hops <value 1-16>
time <sec 0-65535>
config bootp_relay ipif <ipif_name 12>
add <ipaddr>
config bootp_relay ipif <ipif_name 12>
delete <ipaddr>
enable bootp_relay
disable bootp_relay
show bootp_relay ipif <ipif_name 12>
Each command is listed, in detail, in the following sections.
BOOTP R
C
OMMANDS
268
24
ELAY