Standard Drive And Bypass Specifications - YASKAWA E7N Technical Manual

Standard Drive and Bypass Specifications

The standard Drive and Bypass specifications are listed in the following tables.
208 VAC
Bypass Model Number E7L_ *
Motor HP 208V
Bypass rated output current (A)
Drive Model Number CIMR-E7U
Drive rated output capacity (kVA)
Drive rated output current (A)
Drive max. output voltage (V)
Drive max. output frequency (Hz)
Rated voltage (V)
Rated frequency (Hz)
Rated input current (A)
Allowable voltage fluctuation
Allowable frequency fluctuation
DC Reactor
Measures for
power supply
harmonics
12-Pulse
Rectification
Note: The maximum applicable motor output is given for a standard 4-pole motor. When selecting the actual motor and Drive, be sure that the
Bypass and Drive's rated output current is equal to, or greater than, the motor's rated current.
A phase-shifting transformer is required on the power supply for 12-pulse rectification.
* Only 208V model numbers are shown.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table C.1 208 VAC Drive and Bypass Specifications
D003 D004 D007
0.5/0.75 1 1.5/2
3.5 4.6 7.5
22P2 22P2 22P2
1.4 1.8 3.0
3.6 4.6 7.8
3-phase; 200, 208, 220, or VAC (Proportional to input voltage)
3-phase, 200/208/220 VAC, 50/60 Hz
4.3 5.5 9.4
Specifications C - 2
D010 D016 D024 D030
3 5 7.5 10
10.6 16.7 24.2 30.8
22P2 23P7 25P5 27P5
4.1 6.4 8.8 12.0
10.8 16.8 23.0 31.0
120 Hz
13 20 24 37
+ 10%, - 15%
±5%
Optional
Not possible
D046 D059 D074
15 20 25
46.2 59.4 74.8
2011 2015 2018
18.0 23.0 29.0
46.2 59.4 74.8
53 70 89