No Spanning-Tree; Spanning-Tree Bpdumigrationcheck; Spanning-Tree Configuration Name; No Spanning-Tree Configuration Name - D-Link DES-3226L Cli Command Reference

802.1d
fast
off
Default
Format
Mode

no spanning-tree

This command sets the spanning-tree operational mode to disabled. While disabled, the spanning-tree
configuration is retained and can be changed, but is not activated.
Format
Mode

spanning-tree bpdumigrationcheck

This command enables BPDU migration check on a given interface. The all option enables BPDU
migration check on all interfaces.
Format
Mode

spanning-tree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration that this
switch is currently using. The <name> is a string of up to 32 characters.
Default
Format
Mode

no spanning-tree configuration name

This command resets the Configuration Identifier Name to its default.
Format
Mode

spanning-tree configuration revision

This command sets the Configuration Identifier Revision Level is a number in the range of 0 to 65535
and is used to identify the configuration that this switch is currently using.
Default
Format
Mode
IEEE 802.1D-compliant STP mode is used
Fast STP mode is used
STP is turned off
disabled
spanning-tree {<logical slot/port> | all | {off | 802.1d | fast}}
Global Config
no spanning-tree
Global Config
spanning-tree bpdumigrationcheck {<slot/port> | all}
Global Config
The base MAC address displayed using hexadecimal notation.
spanning-tree configuration name <name>
Global Config
no spanning-tree configuration name
Global Config
0
spanning-tree configuration revision <0-65535>
Global Config
Switching Commands 67