• An existing 10/100 Ethernet-based network. Package Contents DCS-900 Fast Ethernet Internet Camera CAT5 Ethernet Cable Manual and Software on CD If any of the above items are missing, please contact your reseller. D-Link DCS-900 Quick Install Guide Power Adapter Camera Stand...
Attach the Swivel Stand Locate the stand mount on the bottom panel of the DCS-900 and screw on the swivel stand to the base of the DCS-900. Connect the Ethernet Cable Connect the included Ethernet cable to the network cable...
Page 6
Configuration You are now ready to run the Setup Wizard, which will guide you quickly through the installation process. Insert the D-Link Driver CD into your CD-ROM drive. Click Install Wizard Click Next D-Link DCS-900 Quick Install Guide...
Page 8
To run the Setup Wizard, click on: Start > Programs > D-Link Setup Wizard. Your camera’s IP Address will be displayed here along with its corresponding MAC Address. Click Wizard You must change the Admin ID and Password immediately to protect your camera against unauthorized access.
Page 9
Click Next If you need to make any changes, click Back to modify your settings. Otherwise, click Restart to save and apply your settings. Click Restart D-Link DCS-900 Quick Install Guide...
Page 10
Wizard using the Link button. You can also use your favorite Web browser, type “http://address” in the address box where address is the IP address that you assigned to the DCS-900 from the previous section. Press Enter. Click ActiveX or Java to view your video images.
4 DCS-900s remotely. Administrators can also record to hard drive and configure advanced settings for the DCS-900. IPView SE is a complete software management tool for the DCS-900 and includes all configurable settings available in the web configuration utility.
Page 12
Click Next Click Yes Click Next Click Finish D-Link DCS-900 Quick Install Guide...
Page 13
After successfully installing the IPView SE, the application program for the DCS-900 is automatically installed to \Programs\IPView SE Directory. To start IPView SE, click on Windows Start > Programs > IPView ® SE > IPView SE. Once the IPView SE application control panel is executed, the...
To add cameras in IPView SE, check that you have your network configured correctly. To add a remote camera, you need to have Internet access. D-Link DCS-900 Quick Install Guide from the IPView...
Page 15
Highlight the camera you wish to add and click on Add. The camera will automatically be added into the IPView SE list view. If you add the same camera more than once you will receive the following message (see below). D-Link DCS-900 Quick Install Guide...
Page 16
IPView SE. The Login Camera dialog box will appear only if your have already set the Username and Password during the Web Configuration setting. Once you login, the following screen will appear. D-Link DCS-900 Quick Install Guide...
IPView SE control panel. Please refer to the Manual located on the CD-ROM for additional information regarding IPView SE. on the IPView SE and you should D-Link DCS-900 Quick Install Guide...