Add A New Camera - D-Link DCS-900 Install Manual

To add a new camera select the Camera button
SE. Make sure that the green lights are on when clicking the camera
button.
A green light under the camera button
means that there is already a camera
connected.
Select the camera you would like to connect to and click Add A
Camera. If the camera is not listed in this list, click the Input IP
Address button. Enter the IP Address of the camera in the specified
field and click Add. If the IP Address is entered incorrectly or if you
have a bad network connection, a dialog box will appear to notify you
of the error. To add cameras in IPView SE, check that you have your
network configured correctly. To add a remote camera, you need to
have Internet access.
D-Link DCS-900 Quick Install Guide

Add a New Camera

from the IPView
14