Schedule Video Recording With Motion Detection - D-Link SECURICAM Network DCS-3220G Manual

Schedule Video Recording with Motion
Detection
To schedule video recording with motion detection, you must first enable motion
detection on the Internet Camera. Click the Motion Detection button under
the Advanced tab from the Configuration screen to access settings that affect
how the DCS-3220G Internet Camera can serve as a security device by
recording only when motion is detected. Note: These settings can be configured
in your Web browser and while logged into the IP surveillance Program.
Click Motion Detection
In this window, follow the steps below to ensure that motion detection is correctly
enabled:
Check "Enable motion detection."
Click on "New" to have a new window to monitor video.
Enter in a window name.
Adjust the "Sensitivity" and "Percentage" levels according to the local
environment. The highest sensitivity and lowest percentage provides
the most sensitive setting.
5 5 5 5 5 After adding the motion window, click on save to enable the activity
display. You can add up to 3 motion windows to trigger recording.
For detailed information about each setting, please refer to Configuration >
Advanced > Motion Detection in the section titled "Using the DCS-3220G
With an Internet Browser" (page 50).
Next, run the IP surveillance program. Click on the Configurations button
and select Scheduler.
121