Sequential Operation - D-Link SECURICAM Network DCS-3220G Manual

Using the DCS-3220G with an Internet
browser (continued)
Configuration > Tools > Applications (Continued)
Reset output -
Trigger action -

Sequential operation

Snapshot every
second(s) -
Send snapshots by email -
Send snapshots by FTP -
Check and save this option to reset the external
device at the digital output back to the original
state.
There are four options for two actions regarding
either trigger condition. They can have multiple
selections. While choosing the trigger output
alarm, the digital output will short both pins to
connect the circuit of the attached external
device; otherwise both pins will be open. While
choosing to upload snapshots, the method can
be either email or FTP. The snapshot names will
be "videopre.jpg",
"videopos.jpg" respectively for the snapshots
before event, right upon event, and after event.
The date and time suffix may be added according
to the option. Confirm the external mail or FTP
server settings in network configuration.
The camera will send snapshots at the specified
interval to the external server according to the
chosen method. Remember this operation is
dependent to the weekly schedule.
Any upload action specified in the options above
will use the method chosen here. The captured
snapshot named "video.jpg" will be attached in
the email with subject "Periodic snapshots."
The captured snapshots will upload to the
external FTP server with the file name depending
on the next option.
57
videotrg.jpg", and