Table of Contents
Advertisement
1. Turn the knob to a necessary heat
setting.
2. To complete the cooking process,
turn the knob to the off position.
5.9 Using the double zone (if
applicable)
To activate the double zone,
turn the knob clockwise. Do
not turn it through the stop
position.
6. CLOCK FUNCTIONS
6.1 Clock functions table
Clock function
6.2 Setting the time. Changing
the time
You must set the time before you operate
the oven.
The
flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
In case of a power cut up to
1 hour, the time of day is
shown and
sure that the time is correct
and press
flashing.
In case of a power cut longer
than 1 hour, you must set the
time again.
Press the
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER To set countdown time. This function has no effect on the
flashes. Make
to stop the
or
to set the correct time.
1. Turn the knob clockwise to position 9.
2. Turn the knob slowly to the symbol
3. To set the necessary heat setting refer
Application
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
operation of the appliance. You can set the MINUTE
MINDER at any time, also when the appliance is off.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
and again until
6.3 Setting the DURATION
1. Set an oven function and temperature.
2. Press
3. Press
The display shows
4. When the time ends,
5. Press any button to stop the acoustic
until you can hear a click. The two
cooking zones are on.
to "Heat settings".
starts to flash.
again and again until
starts to flash.
or
to set the DURATION
time.
.
an acoustic signal sounds. The
appliance deactivates automatically.
signal.
ENGLISH
11
again
flashes and
Advertisement
Table of Contents
