Diverse 3000 Handset With The Base Station - BT 3010 Executive User Manual

Diverse 3010 Executive
Diverse 3010 Executive – Edition 4 – 22 November '00 - 3509
Registering a new Diverse
3000 handset with the
base station
Don't forget that your Diverse 3010
Executive handset is already registered.
Up to six handsets can be registered
and operated from the Diverse 3010
Executive base station. The system
allows you to make internal intercom
calls between two handsets while a third
is making an external call.
Each additional handset you purchase
must be registered at the base station.
The example below shows how to register
a Diverse 3000 Executive or 3010 Micro
handset to the Diverse 3010 Executive
base. For registering Diverse 3000 Classic
handsets refer to the relevant user guide.
Press the
Press the
highlight
Press the
Press the
highlight the base you wish to
register to.
– ––
Press the
–
button.
42
22/3/01 12:03 pm
button.
arrow to
.
button.
arrow to
Page 42
Press the
highlight
Press the
Enter the base station PIN
number (original setting
Press the
shows
(e.g.) (flashes).
You now have up to 1 minute to
register the handset, during which
the beeps will continue.
At the base station:
Press and hold down the
button (for about 10 seconds)
until you hear a tone.
The handset will display the
available handset numbers e.g.
, , , , .
. There is a small delay before
these numbers are displayed
on the screen.
Select and enter one of these
numbers. This is now the
handset's internal number and
is registered with the base
station, e.g.
arrow to
.
button.
).
button. Display
stops flashing.