Setting Up - BT 3010 Executive User Manual

Diverse 3010 Executive
Diverse 3010 Executive – Edition 4 – 22 November '00 - 3509

Setting up

Your handset is already
"registered" to the Diverse
3010 Executive base station.
Plan where you will put your Diverse
3010 Executive. It should be within
two metres of a power socket and the
phone socket.
Plug the power cable into the power
socket on the underside of your Diverse
3010 Executive. The power cable
connector is coloured red. Please take
care that the telephone cord and power
cable plugs are connected to the correct
socket as incorrect placement could
damage the base station.
6
22/3/01 12:02 pm Page 6
It is recommended that the telephone
line cord is not connected until the
handset is fully charged. This will
prevent the risk of the phone being
answered prior to the batteries being
fully charged and therefore not
achieving their optimum capacity.
Use only the power adaptor
C39 280-Z4-C174/..–C67 with your
Diverse 3010 Executive.