Table of Contents
Advertisement
Available languages
Available languages
TV Shape (Aspect Ratio)
Default setting:
4:3 Pan Scan
By default, this option is set for normal TVs with 4:3
aspect ratio. Unless you're sure you have a
WIDESCREEN TV, do not change this setting. The 4:3
Letter Box setting is meant to enable the "Letterbox"
view on DVDs that contain both Letterbox and Pan/Scan
versions.If you are using a wide screen TV, set this
option to
16:9
to match the aspect ratio of your TV.
1
3 4
Use the
/
keys to select an option.
2
Press
SETUP
to exit.
Standard Output
Default setting:
NTSC
Your DVD Player will work with TVs based on the NTSC.
NTSC is the standard TV system in the USA and others.
Scan Mode
Default setting:
Interlace
Normal TVs scan only in "interlaced" mode, because the
odd and even lines are interlaced together in alternate
scans. Progressive Scan is a scanning method offered
on high-end Tvs.
Caution
Do not change the Scan Mode setting unless you are
sure that your TV supports Progressive Scan.
1
If you have a P-SCAN TV, use the key to change
the scan mode to
Progressive
appear, if you do not have P-SCAN TV, the picture
will be restored to your previous setting.
Notification
Changing the scan mode can result in
loss of picture. If the picture is not
?
correct the setting will be restored
automatically after 10 seconds.
Yes
2
Press
SETUP
to exit the VIDEO MENU.
Output
Default setting:
S-Video
Your DVD Player will work with televisions supporting
various video inputs including composite, S-Video,
component and Progressive Scan.
1
When using the composite or S-Video connection,
select
S-Video
.
2
If you plan to use the component connection, use
4
the key to change the output to
3
Press
SETUP
to exit the VIDEO MENU.
4
. A notification will
No
Component
.
25
A/V Output - Picture
Brightness
Contrast
Press RETURN to exit
1
5 6
Use the
/
keys to select Brightness or Contrast
3 4
and the
/
keys to decrease or increase the
value.
A/V Output - Audio
Digital output mode
Dynamic range control
Press RETURN to exit
Digital Output Mode
Default setting:
RAW
Determines the audio format output by the Optical and
Coaxial Digital Audio Output. When playing a Dolby 5.1
soundtrack, leave the setting on
encoded digital signal to a Digital Receiver with a Dolby
5.1 Decoder. If your receiver is not capable of decoding
a Dolby signal, use the
PCM
When playing CDs, leave this setting at
stereo signal on the Digital Output.
1
3 4
Use the
/
keys to select an option.
2
Press
SETUP
to exit the AUDIO MENU.
Dynamic Range Control
Default setting:
OFF
Dynamic Range Control, also called "Midnight Mode"
reduces the variations between loud and soft sounds in
DVD movies. This lets you turn the volume up to hear
softer sounds and dialog, and not worry about extremely
loud scenes disturbing others.
1
3 4
Use the
/
keys to select OFF or ON.
2
Press
SETUP
to exit the AUDIO MENU.
Setup Menu
Picture
Audio
PCM
OFF
RAW
to output the
setting.
PCM
to output a
Advertisement
Chapters
Table of Contents
