Quick-Start Guide; Powering Up; Plugging In And Power On; Time & Date Settings - CyberHome CH-DVR 1600MU Operation Manual

Powering Up

Plugging In and Power On

1
Plug the DVD player's electrical plug into a wall
socket or power strip.
2
Press the STANDBY / ON button on the front panel,
or the POWER button on the remote control to turn
the DVD recorder on.
3
When the DVD player's splash screen appears on
your TV, you're ready to go!
Time and Date Settings
The recorder uses the Time and Date values to
determine when to begin and end Scheduled
Recordings.
1
Press SETUP to enter the SETUP MENU.
2
Use the / keys to select GENERAL, press
ENTER. Use the
press ENTER.
3
Move to the field to be edited using the
Use the / keys to increase or decrease the
4
value of the field.
5
To exit a field using the
6
Press RETURN to exit the CLOCK SETTINGS
MENU.
Note: When entering the Date and Time setting, you
can use the Number buttons to input the date or time
information.
Select Time Format from the menu and press the
key. Use the / keys to select the;
! Time Format - 12HR or 24HR. 12HR mode is
the normal time system used in the USA, relying
on the use of AM /PM to indicate night or day. In
24HR mode, the AM/PM designation is not used,
with 12:00 indicating noon time and 24:00
indicating midnight.
TM
/ keys to select Clock Setting,
/
/ keys
Auto Scanning Channels
Once your Antenna or Cable TV input is connected to
the connector on the back of the unit, you can setup the
recorder's built-in TV Tuner by auto-scanning for
available channels and then adding or deleting the
channels you choose.
This is the easiest way to fill your channel list with those
channels available in your area. The unit scans for
channels automatically. When complete, press
to exit.
1
Press the SOURCE
select TUNER as the SOURCE. Press
2
Press SETUP
press ENTER
Choose the signal type available to you unit (Air or
Cable). Press
3
Select Automatic Search. Press
scans for channels automatically. When complete,
press SETUP
Note: The SETUP
be accessed / changed when you have selected TUNER
from the SOURCE options.

Restore Defaults

Choose this option to reset factory settings such as
keys.
chapter marker, however it will not reset the password
nor channels found with the Automatic Search feature.
Note: remove any discs inside the disc tray and select
the SOURCE as DVD to be able to select User Defaults.

Switching to TV Mode

Once you have configured your channels, you can begin
using the recorder's built-in TV Tuner for Recording or
simply watching your favorite programs.
1
When the unit is first turned on, the DVD Playback
mode is selected by default. Press
use the ARROW
Tuner mode.
2
Use the /
watching TV. Alternatively, you can enter a channel
number directly with
ENTER .
To return to DVD Playback mode, press the
SOURCE key and select DVD.
12
Quick Start Guide Quick Start Guide
key and use the
use the / keys to select General,
. Select TV Signal, press
ENTER.
ENTER.
to exit the Setup menu.
- General - Tuner options can only
SOURCE
and ENTER keys to switch to TV
keys to change channels while
NUMBER keys, and press
SETUP
/ keys to
ENTER .
ENTER.
The unit
and