Quick-Start Guide; Powering Up; Plugging In And Power On; Time & Date Settings - CyberHome DVR 1200MU Operation Manual

Powering Up

Plugging In and Power On

1
Plug the DVD player's electrical plug into a wall
socket or power strip.
2
Press the STANDBY / ON button on the front panel,
or the POWER button on the remote control to turn
the DVD recorder on.
3
When the DVD player's splash screen appears on
your TV, you're ready to go!
Time and Date Settings
The recorder uses the Time and Date values to
determine when to begin and end Scheduled
Recordings.
1
Press SETUP to enter the SETUP MENU.
2
Use the / keys to select GENERAL, press
ENTER. Use the /
press ENTER.
3
Move to the field to be edited using the
Use the / keys to increase or decrease the
4
value of the field.
5
To exit a field using the
6
Press RETURN to exit the CLOCK SETTINGS
MENU.
Select Time Format from the menu and press the
key. Use the / keys to select the;
Hour Mode - 12HR or 24HR. 12HR mode is the
normal time system used in the USA, relying on
the use of AM /PM to indicate night or day. In
24HR mode, the AM/PM designation is not used,
with 12:00 indicating noon time and 24:00
indicating midnight.
TM
keys to select Clock Setting,
/ keys.
/ keys
Auto Scanning Channels
Once your Antenna or Cable TV input is connected to
the connector on the back of the unit, you can setup the
recorder's built-in TV Tuner by auto-scanning for
available channels and then adding or deleting the
channels you choose.
This is the easiest way to fill your channel list with those
channels available in your area. The unit scans for
channels automatically. When complete, press SETUP
to exit.
1
Press the SOURCE key and use the
select TUNER as the SOURCE. Press ENTER.
2
Press SETUP use the
press ENTER. Select TV Signal, press ENTER.
Choose the signal type available to you unit (Air or
Cable). Press ENTER.
3
Select Automatic Search. Press ENTER. The unit
scans for channels automatically. When complete,
press SETUP to exit the Setup menu.

Restore Defaults

Choose this option to clear the channel list of all your
previous changes. Note: remove any discs inside the
disc tray and select the SOURCE as DVD to be able to
select User Defaults.

Switching to TV Mode

Once you have configured your channels, you can begin
using the recorder's built-in TV Tuner for Recording or
simply watching your favorite programs.
1
When the unit is first turned on, the DVD Playback
mode is selected by default. Press SOURCE and
use the ARROW and ENTER keys to switch to TV
Tuner mode.
2
Use the / keys to change channels while
watching TV. Alternatively, you can enter a channel
number directly with NUMBER keys, and press
ENTER.
To return to DVD Playback mode, press the
SOURCE key and select DVD.
12
Quick Start Guide Quick Start Guide
/ keys to
/ keys to select General,