BT 1250 Classic User Manual page 9

You can adjust the volume during a
call.
L
Press the button to increase the
volume.
M
Press the
the volume.
The display shows the current volume
level.
The symbol on your handset display
indicates when you are in range of the base
station. If the symbol disappears you are out
of range and will need to move closer to the
base station.
Please note that this product does not have
autotalk standby. To end a call you must
press the
just replace the handset on the base station.
Redial Press the
take you to the most recent number.
L
Use the or
M
to the number you require.
Press the
dial the number.
button to decrease
button, you cannot
button. This will
button to scroll
button to
C OK Press then , this will delete all
numbers in the redial list.
4
The display will return to the idle
state.
When on a call you can talk to someone in the
same room, without your caller hearing.
During a call, press the
C OK
will now flash to show it is in
operation.
Press the button again to resume
C OK
your call.
button.
9