BT 1250 Classic User Manual page 14

Your base station has a default setting of 0000
but you may want to change this.
If you change your System Code keep a record
of the new number by writing it in the space
provided on page 4.
If you are using more than one base, you can
select which base your handset will use.
Intercom
Press the
Press the
C OK
the display.
Press the
3
Press the
1
Enter existing code (0000 if not
changed). As you enter each digit in
turn the dash will stop flashing. When
you have entered four digits all four
dashes will then start flashing again.
Enter your new System Code. As you
enter each digit in turn the dash will
again stop flashing.
Enter your new System Code again.
Press the
C OK
C OK
14
button.
button. F1 will appear on
button.
button.
button twice to exit.
Press the button.
C OK
Press the button.
7
L
Use the and
M
select the base you require.
The flashing digit on the left of the
handset is the base number.
Flashing -0- indicates that no base has
priority and the handset will therefore
register to the first base it finds.
Press to confirm.
C OK
buttons to