BT 1250 Classic User Manual page 25

On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August '01 ~ 4073
To register a handset to a base
station (if you have changed the
System Code from 0000)
At the base:–
Press and hold down the
button until the PLAY button starts to
flash.
On the handset:–
Press the OK button.
C OK
Press the 9 button.
9
Use the UP or DOWN button to select
L
the base number ie. 1234.
M
Press the OK button.
C OK
Enter the System Code – – – – .
CODE
Wait until the available handset
numbers appear. ie. 456. Then press
the handset number that you want.
Note
The number you save becomes the handset's
name (ie. 'Handset 1').
To de-register a handset from
the base
Intercom
C
SKIP
3
3
CODE
C
C
When planning to use a handset with more
than one base, we recommend that you:
• Give a number to each base (from 1-4).
• Number each handset (from 1-6).
• Register your handset(s) at base 2 (and
3 & 4 if used) using the same internal
number as at base 1.
If you are experiencing difficulty, please call
the BT On-Air Helpline on 0845 601 2476.
Press the INTERCOM button.
Press the OK button. F1 will appear on
OK
the display.
Press the 3 button then the 3 button
again –– –– –– –– will appear on the display.
Enter the System Code (0000 if not
changed). All registered handset
numbers are displayed.
Enter the number of the handset to be
de-registered. INIT=F6 will appear on
the de-registered handset.
OK
Press the C button twice to exit.
OK
Note
Helpline
25