Paging Handsets - BT 1250 Classic User Manual

On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August '01 ~ 4073
Number memory
You can store up to 20 of your most frequently
used numbers.
To store a number in the memory
L
Press the UP or DOWN button.
M
The display shows
M
Use the DOWN button to scroll to
the first available memory location.
Or alternatively
1 2 3
Enter the number of the memory
location and press OK.
C OK
Using the keypad enter the telephone
1 2 3
number you wish to store.
To correct during entering press the
C OK
C button.
C OK Press the OK button to confirm.
To insert a pause when storing a
number in the memory
Press and hold the 0 button until a /
0
appears on the point where you want
to enter a pause. The / indicates a
pause, therefore, when you dial the
number stored, your On-Air 1250
Classic will automatically insert the
pause where it was stored.
To dial a number from the memory
L
Press the UP or DOWN button to
M
display the number you wish to dial.
Press the GREEN PHONE button to
dial the number.
10
C
-- --
1 2 3
C
C
1 2 3
C

Paging handsets

You can alert handset users that they are
wanted, or locate a missing handset. (Paging
calls cannot be answered by a handset.)
To edit memory numbers
L
Press the UP or DOWN button. The
M
display will show
M
Use the DOWN button to scroll to the
required memory number.
Press OK to confirm.
OK
To delete memory numbers
L
Press the UP or DOWN button. The
M
display will show
Enter the number of the memory
location.
Press OK to confirm.
OK
Press the C button to clear and back
OK
space the numbers. Edit entries by
using the numbers on the keypad.
Press OK to confirm.
OK
To page a handset from the base
Press and hold the SKIP
the base. All handsets registered with
the base will ring.
To end paging, press and hold the
SKIP button again.
-- -- .
-- -- .
button on