Remote Access - BT 1250 Classic User Manual

Remote access

You can operate your answering machine from
any external Touchtone
your BT On-Air and entering your remote
access code.
Having a remote access code prevents other
people from accessing your answering
machine functions without your permission.
You must change the remote access code from
the default setting of 0000 for your remote
access to function.
Intercom
Press the
Press the
C OK
Press the
4
Press the
1
Enter your old four digit code (0000
if not changed).
Enter your new four digit code.
Re-enter your new code.
Your code has now been changed.
If you are experiencing difficulty, please call
the BT On-Air Helpline on
22
phone by phoning
TM
button.
button.
button.
button.
If you forget to switch your answering
machine on you can do it from
another telephone:
Dial your telephone number and let
the phone ring. After approximately 10
rings your BT On-Air will automatically
answer, although you will hear no
message.
At this point press the
followed by your remote access code.
Wait for the confirmation tone then
7
press .
Your answering machine will now be
switched on.
Dial your telephone number.
Start listening to your outgoing
message.
Press the
Enter your remote access code.
A confirmation tone is heard.
You now have control of your answering
machine. Any new messages will be
.
automatically played.
button,
button.