Lexmark XM5100 Series User Manual page 186

Understanding the printer menus
Use
Export Configuration File
Export
Export Compressed Logs File
Export
Copy Settings menu
Use
Content Type
Text
Graphics
Text/Photo
Photo
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Paper Saver
Off
2‑up Portrait
2‑up Landscape
4‑up Portrait
4‑up Landscape
Print Page Borders
On
Off
To
Export configuration files to a flash drive.
Export compressed log files to a flash drive.
To
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Specify whether an original document is two‑sided (duplex) or one‑sided, and
then to specify whether the copy should be two‑sided or one‑sided.
Notes:
•
1 sided to 1 sided—The original document has print on one side and the
copy will also have print on one side.
•
1 sided to 2 sided—The original document has print on one side, while
the copy will have print on both sides.
•
2 sided to 1 sided—The original document has print on both sides, while
the copy will have print on just one side.
•
2 sided to 2 sided—The original document has print on both sides, and
the copy will also have print on both sides.
Allow copying two or four sheets of a document on one page.
Note: Off is the factory default setting.
Specify whether or not a border is printed.
Note: Off is the factory default setting.
186