Connecting The Camcorder To A Tv - Vivitar DVR 850HDv2 User Manual

NOTE:
 The ViviLink feature is deactivated by default.
 A ViviLink destination will only be assigned to a photo or video if you manually set it from this menu
or from the ViviLink menu in Capture mode (easily accessible with the ViviLink Quick-Function
button in Capture mode).
 Changing the ViviLink destination site will also make the selected site the new default ViviLink
option. A new default can be selected at any time through this menu.

Connecting the Camcorder to a TV

You can use the TV or HDTV screen in place of the camcorder's LCD screen. On connecting the
TV-out cable (supplied) the LCD screen will turn blank. Use the camcorder as you would to capture
and playback photos and videos. The images will appear on the TV instead of on the LCD screen.
NOTE: The only limitation of using the TV screen is that the camcorder is now not portable.
The camcorder will continue to consume battery power.
1) Connect the camcorder to a TV via the TV-out cable (supplied) or to a HDTV.
2) Turn on the TV and the camcorder, and then set the TV to "AV" mode.
3) Make sure the camcorder is set to the correct TV Output setting. On plugging in the TV out cable a
message will appear on the LCD screen to select NTSC or PAL for the type of TV you are using.
4) Select the option as per the format of the TV set you are using and press the OK button.
5) When the camcorder is set to Capture mode, you can preview the subjects you want to record on
the TV screen.
6) When the camcorder is set to Playback mode, you can review all the photos and videos stored in
the SD memory card on the TV.
52