Table of Contents
Advertisement
ISO Menu
The ISO menu allows you to set the level of sensitivity that your camcorder has to light in the
surrounding environment. When the ISO level is increased, the image sensor in your camcorder will be
more sensitive to light and allow you to capture images in lower-light situations. The higher sensitivity
to light however, may reduce the quality of the images that are taken.
When the ISO is reduced, the image sensor in your camcorder will be less sensitive to light and will
optimize the image quality in environments with bright lighting.
1) Press the OK button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to select the 'ISO' menu.
3) Press the UP or DOWN button to highlight the desired menu selection.
4) Press the OK button to confirm and select the highlighted menu option.
5) A
selected option icon will appear on the selected item.
6) Press LEFT or RIGHT button to select the next menu item.
7) Press the DV button to exit the menu and return to your previous mode.
8) An icon reflecting your selection will display on the LCD screen.
9) Remember that this setting will be saved by your camcorder until you manually change the setting
or restore the camcorder's default factory settings.
Metering Menu
The Metering setting will affect how your camcorder focuses when capturing an image. Depending on
your selection, the camcorder will be more sensitive to focusing on particular areas in the display and
adjust the image color and lighting accordingly.
Center – Averages the light metered from the entire frame, but giving greater weight to the subject in
the center.
Multi – Used in standard conditions the camcorder divides and adjusts the settings of the image into
several zones for light metering such as complex light conditions, position of subject, brightness,
background, direct light and scenes.
Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure on the
subject in the center of the monitor.
1) Press the OK button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to select the 'Metering' menu.
24
Advertisement
Table of Contents
