Table of Contents
Advertisement
1) Press the OK button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the 'Auto Power Off' menu.
3) Press the UP or DOWN to highlight the desired menu selection.
4) Press the OK button to confirm and select the highlighted menu option.
5) A
selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the DC button to exit the menu and return to your previous mode.
8) Remember that this setting will be remembered by your camcorder until you manually change the
setting or restore the camcorder's default factory settings.
Frequency Menu
The options in the Frequency menu represent the frequency of the electrical current in fluorescent
lighting sources in your locale. If your camcorder is set to a frequency that does not match your
country's electric current, you may see flickering or waves on the images taken by your camcorder.
50Hz – UK, Europe and Australia
60Hz – US, Canada and South America
1) Press the OK button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the 'Frequency' menu.
3) Press the UP or DOWN button to highlight the desired menu selection.
4) Press the OK button to confirm and select the highlighted menu option.
5) A
selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the DC button to exit the menu and return to your previous mode.
8) Remember that this setting will be remembered by your camcorder until you manually change the
setting or restore the camcorder's default factory settings.
45
Advertisement
Table of Contents
