Vivitar DVR 850HDv2 User Manual page 38

Anti-Shake Menu
The Anti-Shake feature reduces image distortion that can be caused by movement of the camera while
capturing the image.
1) Press the OK button to open the menus for the current mode.
Press the LEFT or button to scroll and select the 'Anti-Shake' menu.
2)
3) Press the UP or DOWN button to highlight the desired menu selection.
4) Press the OK button to select and save the desired option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the DC button to exit the menu and return to your previous mode.
8) An icon reflecting your selection will display on the LCD screen.
9) Remember that this setting will be saved by your camera until you manually change the setting or
restore the camera's default factory settings.
Face Detect Menu
The Face Detect feature when set to 'On' allows the camera to use a subject's face as the basis for
balancing the other colors and focus in the camera's display. This feature is meant to ensure that the
color and focus of your pictures will be consistently sharp and high-quality.
NOTE: To properly use the Face Detect option, please ensure the following:
 Anti-Shake - Ensure that the Anti-Shake option is set to 'On'. The Anti-Shake option is 'On' by
default when you start using your camera and assists you in properly focusing the image.
 Distance from the camera – The subject's face must be no further than 8 to 9 feet (3.5 meters)
from the camera and the face must cover at least 20% (1 / 5th) of the picture as previewed on the
LCD screen.
 Facing the camera - The face of the subject(s) you are photographing must be facing the camera
and must hold the pose for at least 4 to 5 seconds until the green square(s) appears around the
subject`s face.
Face Detect will not work with a side shot of the subject`s head.
1) Press the OK button to open the menus for the current mode.
Press the LEFT or button to scroll and select the 'Face Detect' menu.
2)
37