The Reset On / Off Switch; Windows 98 Driver Installation - Oregon Scientific MP303 User Manual

THE RESET ON / OFF SWITCH

Please note the following important instructions about the Reset
On / Off switch:
IMPORTANT: Do not switch off the "Reset On / Off" switch when the
device is running. By doing so you risk file corruption of the hard disk,
which may mean that the hard disk will need to be reformatted.
The Reset On / Off switch is designed for use when you are not using
the MP3 player. During long periods of non-use, please turn off the
device using the "Reset On / Off" switch to save the battery. (Even
when the unit is off but the Reset On / Off switch is still in the "on"
position, the battery is being used by the unit).
NOTE: Only resort to using the Reset On / Off switch when the device
is not responding.

WINDOWS 98 DRIVER INSTALLATION

(& FOR 98SE USERS)
Windows ME, 2000, XP users
When you connect your MP303 player to your PC, it will appear as a
removable drive (i.e. "Removable Disk (H:)").
Windows 98SE users
Installing the MP303 driver software will allow your computer to
recognize your MP3 player each time it is connected to the computer.
To install the MP303 driver software:
1. Insert the MP303 CD-ROM into your computer.
2. Follow the onscreen instructions.
3. Restart your computer.
MP303 Eng r10 OP
4
4 9/16/04, 5:47 AM