Radio Mode (87.5-108Mhz) - Oregon Scientific MP303 User Manual

NOTE: If there is not enough space to display the song name of
selected track, the name will scroll from the right to left while on this
screen.
RADIO MODE
In the Radio screen, you can either scan for radio stations automatically
or manually. When scanning for a station automatically, your MP3
player will scan frequencies and stop scanning when a signal strong
enough to listen to is detected.
IMPORTANT: The headphone cord must be inserted into your MP3
player because it serves as the antenna for the radio.
To get to the Radio mode:
From the Main Menu, selecting the "Radio" option will take you to the
FM folder. Use the
the
NOTE: During the first time you access the Radio mode, the player
will do a one-time auto-select of radio channels and save them in
sequential order. While auto saving channels, the buttons are locked.
To preset radio stations:
1. In the "Radio" mode, press the
2. Then press the
NOTE: The unit will preset up to 15 preset stations.
To select a channel:
1. In the "Radio" mode, press the
2. Then use the
MP303 Eng r10 OP
key to scroll down to select "Radio", then press
or MENU / ON button.
is displayed on the screen period.
key. (The unit will then auto scan radio
stations and record them in chronological order).
in the "Preset" mode.
button to move up or down. (The preset
channels will show on the screen - both the FM band number
and the preset channel number).
15
/ OFF key once so "Auto Scan"
/ OFF button to set the screen
15
9/16/04, 5:47 AM