Dell DL4300 Owner's Manual page 166

b. PCIe card holder
c. Hard drive tray (if applicable)
d. Integrated storage controller card
e. Internal USB key (if applicable)
f. Internal dual SD module
g. All expansion card risers
h. Heat sink(s)/heat sink blank(s) and processors(s)/processor blank(s)
i. Memory modules and memory module blanks
j. Network daughter card
k. Cooling fan assembly
l. Cooling shroud
m. Power supply unit(s)
3. Reconnect all cables to the system board.
NOTE: Ensure that the cables inside the system are routed along the chassis wall and secured
using the cable securing bracket.
4. Follow the procedure listed in the After working inside your system section.
5. Import your new or existing iDRAC Enterprise license. For more information, see Integrated Dell
Remote Access Controller User's Guide, at Dell.com/esmmanuals.
6. Ensure that you:
a. Use the Easy Restore feature to restore the Service Tag. For more information, see the Easy
restore section.
b. If the Service Tag is not backed up in the backup flash device, enter the system Service Tag
manually. For more information, see the Entering the system Service Tag section.
c. Update the BIOS and iDRAC versions.
d. Re-enable the Trusted Platform Module (TPM). For more information, see the Re-enabling the
Trusted Platform Module (TPM) section.
Related Links
Trusted Platform Module
Safety instructions
Restoring the Service Tag by using the Easy Restore feature
Initializing the TPM for TXT users
Entering the system Service Tag by using System Setup
Before working inside your system
Installing the Trusted Platform Module
After working inside your system
Entering the system Service Tag by using System Setup
If Easy Restore fails to restore the Service Tag, use System Setup to enter the Service Tag.
1. Turn on the system.
2. Press F2 to enter System Setup.
3. Click Service Tag Settings.
4. Enter the Service Tag.
NOTE: You can enter the Service Tag only when the Service Tag field is empty. Ensure that you
enter the correct Service Tag. After the Service Tag is entered, it cannot be updated or changed.
166