BT 75 User Manual page 7

Setting up
Situate your BT Response 75 close
enough to the phone and mains power
sockets so that the cables will reach.
If you do not have a modern phone
socket, call phone 0800
and ask for a BT engineer to come and
fit the correct socket.
This is a chargeable service.
BT Response 75 – Issue 2 – Edition 1 – 7/10/03
To prevent the mains cable being
pulled out accidentally, place the cable
behind the clip on the back of the unit.
The display will flash for 38 seconds.
It will then show the normal 'no
messages' display. The display will flash
slowly until any button is pressed.
5