BT 75 User Manual page 14

Select the Answer mode in which
you want to check your OGM:
Answer on/off
or
Answer Only.
Press the
Your outgoing message will be
played back to you.
You can delete either of your
outgoing messages and return
to one of the pre-recorded
outgoing messages.
Ensure that you select the
correct outgoing message that
you want to delete. For example,
if you want to delete the
Answer Only outgoing message
make sure your BT Response
75 is set to Answer Only first.
Press the
During playback of your
outgoing message press the
Your OGM will stop playing,
you will hear a short beep and
your BT Response 75 will
return back to the pre-
recorded outgoing message
12
BT Response 75 – Issue 2 – Edition 1 – 7/10/03
button.
button.
button.
The counter will display the
number of messages that have
been recorded in the memory.
If you have received 10 or
more messages the display
will flash 9 to indicate this.
Please see page 23 for a guide
to the display.
Your BT Response 75 is set to
answer calls after 4 rings
You can change the number of
rings before your BT Response
75 will answer a call. You have
a choice of between 2-9 rings
and Time Saver.
The Time Saver setting can avoid
you the cost of a call when accessing
your machine remotely from an
external telephone.
When set to Time Saver your
BT Response 75 will answer
after 6 rings if no new
messages have been recorded,
or 2 rings if new messages
have been recorded (for more
information on remote access,
see page 18).
Press and hold the
button.