Stereo Mode Using The Speakon ® Connector - Crown XLS 202 Operation Manual

XLS Series Power Amplifiers
2 Setup
2.6.2 Stereo Mode Using the
®
Speakon Connector
There are two ways to wire two speakers in ste-
®
reo to the amplifier's Speakon connector.
®
1) Wire the two speakers to the same Speakon
connector as shown in Figure 2.8.
or
®
2) Wire speaker 1 to the amplifier's Speakon
connector, and wire speaker 2 to speaker 1
(Figure 2.9).
®
Figure 2.9 Speakon Stereo Wiring Option 2:
Wire Speaker 1 to the Amplifier's Speakon
Connector, and Wire Speaker 2 to Speaker 1
Operation Manual
AMPLIFIER
®
SPEAKON OUT
CABLE 1: AMPLIFIER OUT TO SPEAKER 1 IN
CABLE 2: SPEAKER 1 OUT TO SPEAKER 2 IN
®
Figure 2.8 Speakon Stereo Wiring Option 1:
®
Wire Two Speakers to One Speakon Connector
SPEAKER 1
SPEAKON IN SPEAKON OUT
OR THRU
1+ TO 1+
1– TO 1–
2+ TO 2+
2– TO 2–
2+ TO 1+
2– TO 1–
SPEAKER 2
SPEAKON IN
page 9