Starting the Saw
WARNING
Bystanders must be well clear of the
general work area of the saw.
2
3
H
L
Push the hand guard (1) forward –
N
the chain is locked.
Press down the trigger lockout (2)
N
and pull the throttle trigger (3) at the
same time. Set Master Control
lever (4) to:
Choke shutter closed (l)
If the engine is cold (also use this
–
position if the engine stopped when
you opened the throttle after
starting)
Starting throttle position (n)
If the engine is warm, i.e. if it has
–
been running for about one minute.
MS 201 T
Hold and start your saw as
N
described.
When engine begins to fire
1
4
H
Move the Master Control lever (1) to
N
the starting throttle position (n).
Hold and start your saw as
N
described.
1
L
As soon as the engine runs
2
H
L
Press down trigger lockout and the
N
blip the throttle trigger (2) – the
Master Control lever (1) moves to
the run position (F) and the engine
settles down to idling speed.
H
L
Pull the hand guard back toward the
N
front handle.
The chain brake is now disengaged –
your saw is ready for operation.
English
1
31