Assembly Procedure; Pressure Plate Holder Attachment; Rear Frame Section; List - Sharp AL2020 Service Manual

6) Remove the pick-up roller.
2)
7) Cut the binding band and remove the multi paper feed sole-
noid.
Multi paper feed
solenoid
C. Assembly procedure
For assembly, reverse the disassembly procedure.
1)
1)
2)
3)
AL-2040 DISASSEMBLY AND ASSEMBLY 8 - 14
D. Pressure plate holder attachment
1) Attach the pressure plate holder so that the resin section is not
covered with the seal M1-N.
Seal M1-N
Attachment
reference
Attachment
reference

7. Rear frame section

A. List
No. Part name Ref.
1 Scanner motor
2 Main motor
3 Exhaust fan motor
4 NIC PWB
5 Main PWB
B. Disassembly procedure
1) Remove four screws, and remove the rear cabinet and the rear
cabinet cover.
Pressure plate
holder
1)
2)
1)
2)
1)