Sharp AL2020 Service Manual page 69

Main Sub
code code
43 05 Fusing temperature setup in duplex copy
In duplex copy, this setup value is added to the fusing temperature of single copy. When this simulation is executed, the
current setup of the code number is displayed. Enter the code number and press the PRINT switch to enable the setup.
Code number
0
1
2
3
4
5
6
7
8
9
09 Fusing control setting for postcard-size paper
When this simulation is executed, the currently set code number is displayed.
Enter the code number and press START key to save the setting.
Code number
0
1
11 Fusing temperature setting for postcard-size paper
When this simulation is executed, the current set value is displayed.
Press UP/UP key to select the setting, and press START key to write into the EPROM. The display returns to the sub code
input standby mode.
Code number
0
1
2
3
4
5
6
7
8
14 Fusing start temperature setting
The fusing temperature when starting printing (first – second sheet) is set.
When this simulation is executed, the currently set code number is displayed.
When the code number is entered with UP/UP key and the START key is pressed, setting is changed over.
Code number
0
1
2
3
4
5
6
7
8
Main cassette paper feed & 2nd cassette paper feed
Manual paper feed
∗ The cassette feed and the manual feed are controlled similarly.
Temperature shift (°C)
±0°C * Default
–8°C
–6°C
–4°C
–2°C
±0°C
+2°C
+4°C
+6°C
+8°C
Temperature shift (°C)
Cancel * Default
Setting
Temperature shift (°C)
160
165
170
175
180
185
190
195 * Default
200
Set temperature (°C)
160
165
170
175
180
185
190
195 (* Default)
200
Mode
AL-2040 SIMULATION, TROUBLE CODES 10 - 9
Content
Lamp ON
AE mode lamp
TEXT mode lamp