4. Fusing section
A. List
No.
Part name Ref.
1
Thermistor
2
PPD2 sensor
3
Heater lamp
4
Pressure roller
5
Heat roller
B. Disassembly procedure
1) Remove the connectors (3 pcs.) of the rear cabinet.
2) Open the side cover, remove two screws, and remove the fus-
ing unit.
1)
3)
3) Cut the binding band, remove the screw, and remove the ther-
mistor.
2)
3)
Thermistor
4) Remove the screw and remove the U-turn guide.
Pressure roller section disassembly
5) Remove the three screws, remove the fusing cover lower on
2)
6) Remove the screw and remove the PPD2 sensor.
2)
1)
AL-2040 DISASSEMBLY AND ASSEMBLY 8 - 5
2)
the right side, and open the heat roller section.
2)
4)
3)
6)
5)
1)
1)
6)
5)
1)
2)
PPD2 sensor