About Menu Operations; What Is Menu; Basic Menu Operations; About The Guide Display - Sharp Aquos LC-40LB700X Operation Manual

Preparation

About Menu operations

What is Menu?

• You need to bring up the On-Screen Display to perform
settings for the TV. The On-Screen Display for the settings
is called "Menu".
• The Menu enables various settings and adjustments. (See
pages 20 and 21.)
• The Menu can be operated with the remote control unit.

Basic Menu operations

Press MENU and the MENU screen displays.
1
MENU
[Picture]
Picture
DYNAMIC
OPC
Backlight [+14] –16
Contrast [+30]
Brightness [ 0] –30
Colour [ 0] –30
Tint [ 0] –30
Sharpness [ 0] –10
Advanced
Reset
Press c / d to select the desired menu, and
2
then press ENTER.
MENU [ Audio ]
Audio
DYNAMIC
Treble [ 0] –15
Bass [ 0] –15
Balance [ 0]
SRS TS HD
Bass enhancer
Reset
Press a / b to select the desired menu item.
3
Press ENTER to proceed if necessary.
MENU [ Audio ]
Audio
DYNAMIC
Treble [ 0] –15
Bass [ 0] –15
Balance [ 0]
SRS TS HD
Bass enhancer
Reset
Press a / b or c / d to select the desired item
4
or adjust the item to the desired level. Press
ENTER if necessary.
Press EXIT or MENU to exit the MENU.
5
Press RETURN as necessary to return to the
previous MENUs.
LC-40LB700X_en_c.indd 19 LC-40LB700X_en_c.indd 19
Setup
Audio ECO
[Off]
+16
0 +40
+30
+30
+30
+10
ECO
+15
+15
L R
[Off]
[On]
ECO
+15
+15
R
L
[Off]
[On]
H Using the control panel of the TV
You can also operate the Menu using the control panel
of the TV.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
L
I
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
About Guide Display
The Guide Display at the bottom of the screen shows
operations with an On-Screen Display.
: Select : Enter : Back
ENTER RETURN
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.

Blue illumination Emblem

You can choose to light up the Blue illumination
Emblem.
Blue illumination Emblem
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Blue illumination", and
3
then press ENTER.
Press a / b to select "On" or "Off", and then
4
press ENTER.
Remote control
buttons
ENTER
a
b
d
c
: End
MENU
19
8/7/2009 12:36:17 PM 8/7/2009 12:36:17 PM