Table of Contents
Advertisement
Converting the
installed load
The dryer has been designed for 10 or 16 amperes.
If the dryer fuse (factory setting) does not correspond
to the socket fuse (household fuse), complete the fol
lowing steps:
0.
1. Connect the dryer to the mains electricity (see pa
ge 28).
2. Turn the programme selector to Off.
3. Simultaneously press and hold the Mu and J
buttons.
4. Turn the programme selector clockwise to Y.
5. Release both buttons.
6. Turn the programme selector 5 positions further
clockwise.
7. Press the Mu button.
8. Press the Mu button. Pressing it again allows the
setting to be changed.
i If the 16 ampere setting has been selected, the
J" lamp flashes.
If the J" lamp is not on, the 10 ampere setting
has been selected.
9. Press the Mu button.
10.Turn the programme selector to Off.
35
Hide quick links:
Advertisement
Table of Contents
