Table of Contents
Advertisement
Reversing the door
catch
The door catch can be reversed if necessary.
The door is hinged on the right at the factory.
You will need:
0.
- Torx screwdrivers, sizes T10 and T20.
- Medium sized slotted screwdriver.
These are available from specialist suppliers.
Carefully tighten all screws by hand. They could other
wise be overtightened.
d
Do not use a power screwdriver.
To remove the door:
! Place the door on something soft (e.g. a blanket)
so that it is not damaged.
1. Undo the screw for the bottom door hinge.
2. Hold the door firmly and unscrew the top door hin
ge.
3. Pull the door and the hinge outwards to the front.
4. Lay the door on the blanket.
31
Hide quick links:
Advertisement
Table of Contents
