Skipping Channels; Setting The Child Lock; Setting The Booster - Sharp Aquos LC-37GA4X Operation Manual

Basic adjustment settings
Manual setting for each channel (continued)

Skipping channels

Channels with "Skip" set to "On" are passed over when
using CHr/s even if selected while watching the
image from the TV.
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information will be
displayed.
2
Press a/b to select "Skip", and then press
ENTER.
• Skip menu displays.
[ Setup ... Programme Setup ... Manual Adjust ]
MENU
Search
Fine [179.25]
Colour sys. [AUTO]
Sound sys. [B/G]
Label [SAT.1]
Skip [Off]
Lock [Off]
Booster [Off]
3
Press a/b to set "Skip" to "On", and then
press ENTER.

Setting the child lock

You can block the viewing of any channel.
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information will be
displayed.
2
Press a/b to select "Lock", and then press
ENTER.
• Child lock menu will be displayed.
Search
Fine [179.25]
Colour sys. [AUTO]
Sound sys. [B/G]
Label [SAT.1]
Skip [Off]
Lock [Off]
Booster [Off]
Press a/b to set "Lock" to "On", and then
3
press ENTER.
NOTE
• See page 45 for setting password.
• If "Lock" is set to "On" for a channel, "Child lock has been
activated." is displayed when you select the channel, and
the image and sound of the channel is blocked.
• When pressing ENTER while "Child lock has been
activated." is displayed, password input menu will be
displayed. Inputting the correct password lifts the child
lock temporarily until the power is turned off.
Skip menu
Off
On
Lock menu
Off
On

Setting the booster

Picture quality may improve in regions with weak signal
strength using this function.
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
2
Press a/b to select "Booster", and then
press ENTER.
• Booster menu displays.
Booster Menu
Search
Fine [179.25]
Colour sys. [AUTO]
Sound sys. [B/G]
Label [SAT.1]
Skip [Off]
Lock [Off]
Booster [Off]
3
Press a/b to set "Booster" to "On", and then
press ENTER.
NOTE
• If signal strength is strong enough for the selected
channel, the effect is negligible and may produce
instability. In such case, select "Off".
Off
On
23