Table of Contents
Advertisement
Linksys
7
Select Computer Configuration -> Windows Settings -> Security Settings ->
Public Key Policies, right-click Automatic Certificate Request Settings -> New
-> Automatic Certificate Request
Figure 56: Group Policy Screen
8
When the Certificate Request Wizard appears, click Next
Select Computer, click Next
9
Figure 57: Certificate Template Screen
Appendix C PC And Server Configuration
10 Ensure that your Certificate Authority is checked, click Next
11 Review the policy change information and click Finish
12 Click Start -> Run, type "cmd" and press enter
Enter "secedit /refreshpolicy machine_policy"
This command may take a few minutes to take effect
Internet Authentication Service (RADIUS) Setup
1
Select Start -> Programs -> Administrative Tools -> Internet Authentication Service
2
Right-click on Clients, and select New Client
Figure 58: Service Screen
3
Enter a name for the access point, click Next
4
Enter the address or name of the wireless access point, and set the shared
secret, as entered on the Security Settings of the wireless access point
5
Click Finish
6
Right-click on Remote Access Policies, select New Remote Access Policy
7
Assuming you are using EAP-TLS, name the policy "eap-tls", and click Next
Click Add...
8
If you don't want to set any restrictions and a condition is required, select
Day-And-Time-Restrictions, and click Add...
Click Permitted, then OK Select Next
9
10 Select Grant remote access permission Click Next
45
Advertisement
Table of Contents
