Workgroup Bridge - Linksys LAPAC1750 User Manual

Linksys
Data - QoS Screen
QoS Setting
Wireless Radio Select the desired radio from the list.
Radio 1 is for 2.4 GHz, and Radio 2 is for 5 GHz.
QoS Settings
SSID The index of SSID.
SSID Name The name of the SSID.
VLAN ID
The VLAN ID of the SSID.
Priority Select the priority level from the list. VLAN must be enabled
in order to set priority.
The 802.1p will be included in the VLAN header of the packets
which are received from the SSID and sent from Ethernet
interface.
WMM Enable or disable WMM.
WMM (Wi-Fi Multimedia) is a component of the IEEE 802.11e
wireless LAN standard for QoS.
WMM provides prioritization of wireless data packets from
different applications based on four access categories: voice,
video, best effort, and background. For an application to
receive the benefits of WMM QoS, both it and the client
running that application have to have WMM enabled. Legacy
applications that do not support WMM and applications that
do not require QoS, are assigned to the best effort category,
which receives a lower priority than voice and video.
WMM is enabled by default.

Workgroup Bridge

Workgroup Bridge feature enables the access point to extend the accessibility of
a remote network. In Workgroup Bridge mode, the access point acts as a wireless
station (STA) on the wireless LAN. It can bridge traffic between a remote wired
network and a wireless LAN.
When Workgroup Bridge is enabled, SSID configuration still works to provide
wireless services to clients.
All access points participating in Workgroup Bridge must have the identical
settings for Radio interface, IEEE 802.11 mode, Channel Bandwidth, Channel (Auto
is not recommended).
Figure 30: Workgroup Bridge
CHAPTER 2 Access Point Setup
23