Table of Contents
Advertisement
Linksys
Data - WPA/WPA2-Enterprise Screen
WPA/WPA2-Enterprise
Primary Server
Enter the IP address of the RADIUS Server on your
network
Primary Server Port
Enter the port number used for connections to the
RADIUS Server It is a value from 1 to 65534, and
default is 1812
Primary
Shared
Enter the key value to match the RADIUS Server It
Secret
consists of 1 to 64 characters
Backup Server
The Backup Authentication Server will be used when
the Primary Authentication Server is not available
Backup Server Port
Enter the port number used for connections to the
Backup RADIUS Server It is a value from 1 to 65534,
and default is 1812
Backup Shared Secret Enter the key value to match the Backup RADIUS
Server It consists of 1 to 64 characters
WPA Algorithm
The encryption method is TKIP or AES
Key Renewal Timeout Specify the value of Group Key Renewal It is a value
from 600 to 36000, and default is 3600 seconds
WPA automatically changes secret keys after a
certain period of time The group key interval is the
period of time between automatic changes of the
group key, which all devices on the network share
Constantly keying the group key protects your
network against intrusion, as the would-be intruder
must cope with an ever-changing secret key
RADIUS
Use RADIUS server for authentication and dynamic WEP key generation for
data encryption
Figure 23: RADIUS Settings
Data - RADIUS Screen
Authentication Server
Primary Server
Enter the IP address of the RADIUS Server on your
network
Primary Server Port
Enter the port number used for connections to the
RADIUS Server It is a value from 1 to 65534, and
default is 1812
Primary Shared
Enter the key value to match the RADIUS Server It
Secret
consists of 1 to 64 characters
Backup Server
The Backup Authentication Server will be used when
the Primary Authentication Server is not available
Backup Server Port
Enter the port number used for connections to the
Backup RADIUS Server It is a value from 1 to 65534,
and default is 1812
Backup Shared Secret Enter the key value to match the Backup RADIUS
Server It consists of 1 to 64 characters
CHAPTER 2 Access Point Setup
18
Advertisement
Table of Contents
