Set The Scheduling Algorithm - TRENDnet TEG-160WS User Manual

TRENDnet User's Guide
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
© Copyright 2014 TRENDnet. All Rights Reserved.

Set the Scheduling Algorithm

Bridge > QoS > Scheduling Algorithm
1. Log into your switch management page (see
on page 7).
2. Click on Bridge, click on QoS and click on Scheduling Algorithm.
3. Review the settings. Click Apply to save the settings.
• Strict Priority - The port transmits all packets out of higher priority queues
before transmitting any from the lower priority queues.
• WRR (Weighted RoundRobin) - The port transmits a set number of packets
from each queue, in a round robin fashion, so that each has a chance to
transmit traffic.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
TEG-160WS
"Access your switch management page"
45