Hard Button Programming; Multibyte International Characters - Crestron Isys TPS-12B Operation Manual

®
Crestron Isys TPS-12B/W, TPS-15B/W & TPS-17B/W
VT Pro-e "Page Properties" Window – Bit Depth Selection
Operations Guide – DOC. 6464
In VT Pro-e, the Compress checkbox permits the image to be compressed when
compiling. The 16 Bits checkbox converts a 24-bit or 32-bit image to 16 bits. This
conversion to a 16-bit image may cause the loss of some subtle shading. To
compensate for this, use the dithering to simulate the original shading. Various
dithering types are available. Refer to the following illustrations.
VT Pro-e "Image Properties" Window – Bit Depth Selection

Hard Button Programming

Four of the buttons can be programmed to access any frequently used command.
Each button has a permanently fixed digital join number. The sequence of digital
join numbers is (left to right) 1 through 4. Refer to the following diagram for their
assigned join numbers. A description for each button signal is described in the
SIMPL Windows help file (F1).
Pushbutton Layout and Join Number Assignment

MultiByte International Characters

Most languages use a single byte of 8 bits to represent a character, e.g. English,
French, German, Hebrew, Russian, Thai, etc.
Multibyte character fonts require more than the usual 8 bits to specify a character.
This occurs when a language has more than 256 characters (2
example, Chinese fonts contain several thousand characters. Other multibyte
languages include Japanese and Korean.
Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W ¥ 37
Tilt Touchpanels
Join
Join Join Join
1 2 3 4
8
) in a font. For