Lexmark MX610 Series User Manual page 173

Understanding the printer menus
Use
Background Removal
‑4 to 4
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Adjust ADF Skew
Auto
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Auto Convert Color Faxes to Mono
Faxes
On
Off
Use
Enable Fax Receive
On
Off
Fax Job Waiting
None
Toner
Toner and Supplies
Rings to Answer
1–25
To
Adjust the amount of background visible on a scanned image.
Note: 0 is the factory default setting.
Specify the contrast in the scanned image.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible.
Note: 0 is the factory default setting.
Correct the slight skew in the scanned image.
Notes:
•
Off is the factory default setting.
•
This menu item is supported only in select printer models.
Specify if the original document is scanned edge-to‑edge prior to faxing.
Note: Off is the factory default setting.
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
Specify "warm" or "cool" outputs. "Cool" values generate a bluer output than the
default while "warm" values generate a redder output than the default.
Note: 0 is the factory default setting.
Convert all outgoing faxes to black and white.
Note: On is the factory default setting.
To
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
173