Lan Ip Setup - NETGEAR CG3000Dv2 User Manual

For example, some systems tracking the performance of the broadband connections in
terms of latency and packet loss need the gateway to reply to ping requests.
3. Type the last digits of the IP address in the DMZ Address field.
The DMZ host feature is disabled when the last digit is zero.
4. Click Apply.

LAN IP Setup

The LAN IP screen allows you to configure LAN services such as the IP address of the
gateway and DHCP. The TCP/IP and DHCP default values work fine in most cases.
Note: If you disable the DHCP server, assign to your computer a static IP
address to reconnect to the gateway and enable the DHCP server
again.

To configure LAN IP settings:
1. In the main menu, under Advanced, select
LAN IP.
2. Specify these settings:
• LAN IP Address. The factory default
setting is 192.168.0.1.
• Subnet Mask. The network number
portion of an IP address. Unless you
are implementing subnetting, use
255.255.255.0 as the subnet mask.
• DHCP Server. The Yes radio button is
selected by default so the gateway acts
as a DHCP server, providing the
TCP/IP configuration for all the
computers connected to it.
If you plan to assign IP addresses
manually, or you have another DHCP
server on your network, select the No
radio button.
• Starting IP Address and Ending IP
Address. These fields specify the
range in the IP address pool.
• Max Users. The maximum number of
users on the network.
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Advanced Settings
43