View The Gateway Status - NETGEAR CG3000Dv2 User Manual

View the Gateway Status

To see hardware and firmware details and basic status information about the gateway, use
the Modem Status screen.

To view the gateway status:
From the main menu, under Maintenance, select Modem Status.
The following screen displays.
The following table describes the fields displayed in this screen:
Modem field
Standard Specification
Compliant
Hardware Version
Software Version
Cable MAC Address
Device MAC Address
Cable Modem Serial Number The serial number of the gateway hardware.
CM certificate
System Up Time
Network Access
Cable Modem IP Address
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Description
DOCSIS 3.0
The hardware version of the gateway.
The version of firmware currently running on the gateway.
The MAC address used by the cable modem port of the gateway. This MAC
address might need to be registered with your cable service provider.
The WAN MAC address used by the device.
If the cable modem certificate is installed, it is possible for the service
provider to upgrade your Data Over Cable service securely.
Time since the last boot-up.
Shows whether traffic can be forwarded from the LAN to the network.
The current Internet IP address. If assigned dynamically and not connected
to the Internet, this field is blank.
Maintaining Your Network
28