Uploading A Simpl Windows Program - Crestron QM-TX Operation Manual

QuickMedia™ Transmitter
A control system source file has
the extension .smw. A compiled
SIMPL Windows file has the
extension .spz for a 2-Series
control system.
28 • QuickMedia™ Transmitter: QM-TX
null modem RS-232 cable. Serial connection to a 2-Series control
processor requires a straight through cable. Direct TCP/IP connection
requires a straight through CAT5 cable with 8-pin RJ-45 connectors.
2. With a serial connection, verify that the correct COM port on the PC
has been selected. Some computers have more than one COM port;
some may be internal (e.g., for a modem). Consult the manufacturer's
documentation for further information about the COM ports on your
PC.
3. Remove and reapply power to the control system.
4. If communication still cannot be established, contact Crestron customer
service.

Uploading a SIMPL Windows Program

The SIMPL Windows file can be uploaded to the control system using SIMPL
Windows or via Installer's Toolbox.
Upload via SIMPL Windows
1. Start SIMPL Windows.
2. Select File | Open to view the "Open" window, navigate to the SIMPL
Window file (.smw), and click Open.
3. Select Project | Transfer Program.
Upload via Installer's Toolbox
1. Verify that the procedure for "Communication Settings" that begins on
page 25 has been performed.
2. Open Installer's Toolbox.
3. Select Tools | System Info.
Installer's Toolbox – Tools | System Info
4. When the "System Info" window appears, the Functions option
becomes available from the menu bar.
5. Select Functions | SIMPL Program.
6. The "SIMPL Program" window contains information about the
currently loaded SIMPL program (if any), and permits you to stop,
Crestron QM-TX
Operations Guide - DOC. 6334