Table of Contents
Advertisement
XD1228 OPERATION
General Operation
Press and hold AUDIO/MENU for more than 3 seconds to
Setup Menu
access the setup menu, then press AUDIO/MENU to cycle
through menu options. When desired option appears in the
display, rotate the volume knob left/right to adjust or activate
the desired function.
Menu Function
Options
LOUD OFF
Loudness
Curve
LOUD ON
FRE USA
Tuner
Frequency
Spacing
FRE EU
LOC OFF
Local/Distance
Tuning
LOC ON
CLK ON
Clock
Display
CLK OFF
BEEP OFF
Beep
Confirmation
BEEP ON
ILLU HI
Illumination
Dimmer
ILLU LO
USB Charging Port
Audio
6
All manuals and user guides at all-guides.com
Disables the loudness function.
Enables the loudness function. Activating this feature
will enhance the bass and treble frequencies when
listening to music at low volumes.
Programs the unit to USA tuner spacing.
(200kHz for FM and 10kHz for AM). (Tuner mode only)
Programs the unit to European tuner spacing.
(50kHz for FM and 9kHz for AM). (Tuner mode only)
Activates distance tuning.
Activates local tuning for strong station reception only.
Programs unit to display the clock when the power is
off.
Programs unit to not display the clock when the power
is off.
Disables the confirmation beep.
Enables the confirmation beep.
Programs the LCD to the brightest illumination level.
Lowers the LCD illumination level.
Insert the USB connector of a battery powered USB device
into the USB charging port on the front panel, which
provides 5 volts DC and 1.0 amps. The USB device will
immediately begin charging.
Note: The USB charging port may not be compatible with
every device due to differences in power requirements.
Note: This USB port provides power only, and will not
playback music from a USB device.
Press AUDIO to select between Volume (default), Bass,
Treble, Balance, Fader and EQ.
VOLUME
BASS
TREBLE
Action
EQ
BALANCE
FADER
Advertisement
Table of Contents
